From: Robert Miller (rmiller@SMUD.ORG)
Date: Fri Mar 07 2003 - 10:08:09 EST
Also, make sure that you have your gateway (in the RIPL -> addresses
settings) set to the address of your router on the same subnet as your
client. And, not knowing whether you've done this before or not, you may
wanna check that you have a NIM route set up from your master machine's
subnet to your client machine's subnet...
--rm
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU]On Behalf Of
Holger.VanKoll@SWISSCOM.COM
Sent: Friday, March 07, 2003 1:09 AM
To: aix-l@Princeton.EDU
Subject: Re: NIM mksysb install - just sits there. MORE: bootp problem
The client is on a different subnet than the server.
I think I'm leaning more towards this being my
problem, although I'm not sure what I don't have set
up correctly.
ask your network-admin to let the router forward bootp/dhcp
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:38 EDT