From: justin.bleistein@SUNGARD.COM
Date: Mon Feb 24 2003 - 13:18:37 EST
remember though you can't create more then 5,000 users on a system without
splitting the group file. So if you run this automated you need to watch
it.
--Justin Richard Bleistein
Adams Kevin J
<kevin.adams@PHS. To: aix-l@Princeton.EDU
COM> cc:
Sent by: IBM AIX Subject: Re: adding users script
Discussion List
<aix-l@Princeton.
EDU>
02/24/2003 01:18
PM
Please respond to
IBM AIX
Discussion List
Look into the mkuser command and the mkuser.default file.
A script should be very easy.
Kevin Adams
-----Original Message-----
From: Inshan Singh [mailto:ISINGH@CO.PALM-BEACH.FL.US]
Sent: Monday, February 24, 2003 6:24 AM
To: aix-l@Princeton.EDU
Subject: [aix-l] adding users script
Does anyone out there have a script that will add users to the
system? E.g I have about 50 users I need to add, but it is to much
work with Smitty.
Thanks in advance.
This electronic message transmission, including any attachments, contains
information from PacifiCare Health Systems Inc. which may be confidential
or privileged. The information is intended to be for the use of the
individual or entity named above. If you are not the intended recipient, be
aware that any disclosure, copying, distribution or use of the contents of
this information is prohibited.
If you have received this electronic transmission in error, please notify
the sender immediately by a "reply to sender only" message and destroy all
electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:36 EDT