From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Mon Feb 24 2003 - 13:18:31 EST
Look into the mkuser command and the mkuser.default file.
A script should be very easy.
Kevin Adams
-----Original Message-----
From: Inshan Singh [mailto:ISINGH@CO.PALM-BEACH.FL.US]
Sent: Monday, February 24, 2003 6:24 AM
To: aix-l@Princeton.EDU
Subject: [aix-l] adding users script
Does anyone out there have a script that will add users to the system? E.g
I have about 50 users I need to add, but it is to much work with Smitty.
Thanks in advance.
This electronic message transmission, including any attachments, contains information from PacifiCare Health Systems Inc. which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.
If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:36 EDT