From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Thu Jan 30 2003 - 20:12:56 EST
Joseph,
The AIX System Management Guide: Communications and Networks, SC23-4127,
goes into very little detail, but tells you the steps to execute via Smitty.
Here's the Basic PPP Setup Guide for AIX 4.2 and 4.3
http://www-1.ibm.com/support/docview.wss?uid=aix13e4b62847624ef1e85256816006
9feb5
I'll see what else I can dig up.
Kevin Adams
-----Original Message-----
From: Jolet, John [mailto:John.Jolet@MISYSHEALTHCARE.COM]
Sent: Thursday, January 30, 2003 4:39 PM
To: aix-l@Princeton.EDU
Subject: Re: [aix-l] send/receive files using dial-up modem
you make sure that the filesets are installed...if they are in smit, you'll
see under communicatons, tcpip, (i think further configuration), ppp. if
you don't see a menu about ppp, get your install media and install all the
ppp filesets...
i think it's bos.net.ppp or some such
-----Original Message-----
From: Leyden, Joseph [mailto:LeydenJ@MTA.NET]
Sent: Thursday, January 30, 2003 6:57 PM
To: aix-l@Princeton.EDU
Subject: Re: send/receive files using dial-up modem
How do you set up a PPP server?
any link I can follow?
-----Original Message-----
From: Adams Kevin J [mailto:kevin.adams@PHS.COM]
Sent: Wednesday, January 29, 2003 10:01 AM
To: aix-l@Princeton.EDU
Subject: Re: send/receive files using dial-up modem
You might consider setting up a PPP server on the AIX box, then you could
use FTP.
Kevin Adams
-----Original Message-----
From: Leyden, Joseph [mailto:LeydenJ@MTA.NET]
Sent: Wednesday, January 29, 2003 9:50 AM
To: aix-l@Princeton.EDU
Subject: Re: [aix-l] send/receive files using dial-up modem
Sorry I forgot to mention that I'm not
sending/receiving between 2 AIX but rather
from a PC and an AIX server.
JOe
-----Original Message-----
From: Baker, Sanchia [mailto:Sanchia.B.Baker@ACCENTURE.COM]
Sent: Wednesday, January 29, 2003 9:22 AM
To: aix-l@Princeton.EDU
Subject: Re: send/receive files using dial-up modem
try looking up uucp & uuto commands. The files you want to send may need to
be uuencoded ( converts bin to ascii or vice versa). See man for details
HTH
Sanchia
-----Original Message-----
From: Leyden, Joseph [mailto:LeydenJ@MTA.NET]
Sent: 29 January 2003 17:16
To: aix-l@Princeton.EDU
Subject: Re: send/receive files using dial-up modem
I know I can't use FTP since this is not
a TCP/IP connection but simple dial-up.
Is there a shareware zmodem protocol
to send/receive files from AIX 4.3.2?
TIA
Joe
This electronic message transmission, including any attachments, contains
information from PacifiCare Health Systems Inc. which may be confidential or
privileged. The information is intended to be for the use of the individual
or entity named above. If you are not the intended recipient, be aware that
any disclosure, copying, distribution or use of the contents of this
information is prohibited.
If you have received this electronic transmission in error, please notify
the sender immediately by a "reply to sender only" message and destroy all
electronic and hard copies of the communication, including attachments.
This electronic message transmission, including any attachments, contains information from PacifiCare Health Systems Inc. which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.
If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:32 EDT