From: Bob Booth - UIUC (booth@UIUC.EDU)
Date: Thu Jan 30 2003 - 19:54:56 EST
Might also look into 'kermit as well. There is a server/client for AIX
which may simplify the whole project...
Do a websearch on kermit (not the frog)..
bob
On Thu, Jan 30, 2003 at 07:39:08PM -0500, Jolet, John wrote:
> you make sure that the filesets are installed...if they are in smit, you'll
> see under communicatons, tcpip, (i think further configuration), ppp. if
> you don't see a menu about ppp, get your install media and install all the
> ppp filesets...
> i think it's bos.net.ppp or some such
>
>
> -----Original Message-----
> From: Leyden, Joseph [mailto:LeydenJ@MTA.NET]
> Sent: Thursday, January 30, 2003 6:57 PM
> To: aix-l@Princeton.EDU
> Subject: Re: send/receive files using dial-up modem
>
>
> How do you set up a PPP server?
> any link I can follow?
>
> -----Original Message-----
> From: Adams Kevin J [mailto:kevin.adams@PHS.COM]
> Sent: Wednesday, January 29, 2003 10:01 AM
> To: aix-l@Princeton.EDU
> Subject: Re: send/receive files using dial-up modem
>
>
> You might consider setting up a PPP server on the AIX box, then you could
> use FTP.
> Kevin Adams
>
> -----Original Message-----
> From: Leyden, Joseph [mailto:LeydenJ@MTA.NET]
> Sent: Wednesday, January 29, 2003 9:50 AM
> To: aix-l@Princeton.EDU
> Subject: Re: [aix-l] send/receive files using dial-up modem
>
>
> Sorry I forgot to mention that I'm not
> sending/receiving between 2 AIX but rather
> from a PC and an AIX server.
>
> JOe
>
> -----Original Message-----
> From: Baker, Sanchia [mailto:Sanchia.B.Baker@ACCENTURE.COM]
> Sent: Wednesday, January 29, 2003 9:22 AM
> To: aix-l@Princeton.EDU
> Subject: Re: send/receive files using dial-up modem
>
>
> try looking up uucp & uuto commands. The files you want to send may need to
> be uuencoded ( converts bin to ascii or vice versa). See man for details
>
> HTH
>
> Sanchia
>
> -----Original Message-----
> From: Leyden, Joseph [mailto:LeydenJ@MTA.NET]
> Sent: 29 January 2003 17:16
> To: aix-l@Princeton.EDU
> Subject: Re: send/receive files using dial-up modem
>
>
> I know I can't use FTP since this is not
> a TCP/IP connection but simple dial-up.
> Is there a shareware zmodem protocol
> to send/receive files from AIX 4.3.2?
>
> TIA
> Joe
>
>
> This electronic message transmission, including any attachments, contains
> information from PacifiCare Health Systems Inc. which may be confidential or
> privileged. The information is intended to be for the use of the individual
> or entity named above. If you are not the intended recipient, be aware that
> any disclosure, copying, distribution or use of the contents of this
> information is prohibited.
>
> If you have received this electronic transmission in error, please notify
> the sender immediately by a "reply to sender only" message and destroy all
> electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:32 EDT