From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Mon Jan 13 2003 - 14:27:12 EST
Harish,
The mac address is a burned in constant. You can supply an alternate
ethernet (locally administered) mac address.
Run smitty chgenet to display/change or lsattr -El entx to display, and
chdev -l entx -a use_alt_addr=yes -a alt_addr=0x00000000000n to change.
You must first "ifconfig enx down detach" the interface before you can
change it (this will drop all connections and possibly yours).
Then "ifconfig up enx".
If your default route in on this interface, you may need to add it back.
Kevin Adams
-----Original Message-----
From: Harish Hirani [mailto:Harish.Hirani@T-MOBILE.CO.UK]
Sent: Monday, January 13, 2003 7:26 AM
To: aix-l@Princeton.EDU
Subject: [aix-l] Configure interface with its mac address
Hi,
Does any one know how to configure interface with its on mac address,
currently I have all mac address same on all enterface.
how do I get the mac address of the each interface and then configure the
interface.
Thanks
Harish
NOTICE AND DISCLAIMER:
This email (including attachments) is confidential. If you have received
this email in error please notify the sender immediately and delete this
email from your system without copying or disseminating it or placing any
reliance upon its contents. We cannot accept liability for any breaches of
confidence arising through use of email. Any opinions expressed in this
email (including attachments) are those of the author and do not necessarily
reflect our opinions. We will not accept responsibility for any commitments
made by our employees outside the scope of our business. We do not warrant
the accuracy or completeness of such information.
This electronic message transmission, including any attachments, contains information from PacifiCare Health Systems Inc. which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.
If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:28 EDT