From: Ron Bramblett (bramblet@FULLER.COM)
Date: Wed Dec 18 2002 - 10:20:28 EST
Hello,
I have a situation that I need solved. I have talked to Prophet 21 and
their expert is stumped by it.
RS6000 7025-F40
AIX 4.3.3 was 4.2.1
FC 6025 PCI Dual Channel Ultra2 SCSI Adapter
6 Drives
Last week I tried an upgrade from 4.2.1 to 4.3.3 ML 08
1st Step Migration to 4.3.1 failed with auto script due to this
driver. devices.pci.00101010 I think. I went ahead and tried to
install it manually. It seemed to go fine.
2nd Step Update 4.3.x to 4.3.3 failed also due to the following drivers
bos.loc.utf.ZH_CN
devices.pci.00100c00.rte
(The first one I had instructions in case it failed to install it
manually so I did those. The 2nd one I modified the first instruction to
the name and it looked like it worked fine. I got the ok afterwards on
both)
3rd Step Maintenece Level 08 failed on the following drivers
devices.isa.sio_baud.rte 4.3.2.1 : 4.3.0.0 -- AIX 4330-08 Update
devices.pci.00100b00.diag: 4.3.3.25 : 4.2.1.0 -- AIX 4330-08 Update
devices.pci.00100c00.diag :
(As above I applied the drivers manually and seemed to work.)
Our Hard drives are mirrored. Disk0 is primary system drive. Disk3 is
the mirror copy of the system drive.
I tried to mirror the rootvg Disk3 back to the Disk0 and it failed.
extendvg rootvg hdisk3
# lspv
hdisk0 00302592ffe48b64 rootvg
hdisk1 00302592ffe48d4d p21vg
hdisk2 0030259241317729 p21vg
hdisk3 001362d69f32b191 rootvg
hdisk4 00302592a4fa28c2 p21vg
hdisk5 0030259297bf575e p21vg
#
# mirrorvg -m rootvg hdisk3
0516-1259 mirrorvg: None of the
available disks support booting on this
specific system or the boot logical
volume already exists on
the specified disk.
0516-1200 mirrorvg: Failed to mirror
the volume group.
TRIED THRU SMIT :
Command: failed stdout: yes stderr:
no
Before command completion, additional
instructions may appear below.
0516-1259 mirrorvg: None of the
available disks support booting on this
specific system or the boot logical
volume already exists on
the specified disk.
0516-1200 mirrorvg: Failed to mirror
the volume group.
# ipl_varyon -i
PVNAME BOOT DEVICE PVID VOLUME GROUP
ID
hdisk0 YES 00302592ffe48b64
00302592e7113991
hdisk3 NO 001362d69f32b191
00302592e7113991
hdisk1 NO 00302592ffe48d4d
0030259241317a1b
hdisk2 NO 0030259241317729
0030259241317a1b
hdisk4 NO 00302592a4fa28c2
0030259241317a1b
hdisk5 NO 0030259297bf575e
0030259241317a1b
Any ideas of where to start
-- Ron Bramblett Sys Admin Fuller Brush Company
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:25 EDT