From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Mon Dec 09 2002 - 13:15:48 EST
Drew,
What you want to use is PPP, then you could use plain FTP or RCP/SCP or
whatever you would normally use.
PPP would assign an IP address for you. You would run the PPP server on one
box, and the PPP client on the other.
The AIX System Management Guide: Communications and Networks book has a
little info.
IBM tech support has a PPP Cookbook and some other guides they could send
you (if you have support).
It's not terribly hard to setup vis Smitty.
Good luck,
Kevin Adams
-----Original Message-----
From: Drew [mailto:apt@dcs-success.com]
Sent: Monday, December 09, 2002 8:09 AM
To: aix-l@Princeton.EDU
Subject: [aix-l] Dial up dhcp server AIX to AIX
Hello and season's greetings to all,
I am looking for some documentation pertaining to the following:
I would like to have my AIX box dial up using am modem to another AIX box
and obtain an ip address. I need to enhance remote administration and file
sharing for our smaller clients without broadband. I have the modems set up
and tested on each side of the connection, and I can use a third party
product called TERM to transfer programs.
any advice would be very helpful,
Thank you all,
Drew
This electronic message transmission, including any attachments, contains information from PacifiCare Health Systems Inc. which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.
If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:24 EDT