From: Saxon, Lamar (Lamar.Saxon@AMERICREDIT.COM)
Date: Mon Nov 25 2002 - 12:41:40 EST
We have quite a few etherchannel devices.
Are you using Cisco switches ?
The document is here:
http://techsupport.services.ibm.com/server/aix.techTips?refNo=10032472761823
4
Lamar
-----Original Message-----
From: Ferenc Gyurcsan [mailto:fgyurcsa@AVAILANT.COM]
Sent: Saturday, November 23, 2002 1:51 PM
To: aix-l@Princeton.EDU
Subject: Re: ether channel - dual nics
With aix 5, you could configure virtual ip address and dead gateway
detection.
Or, depending on your needs, HACMP may be a more comprehensive choice.
--Ferenc
-----Original Message-----
From: Page, Jennifer [mailto:Jennifer.Page@RBCDAIN.COM]
Sent: Saturday, November 23, 2002 1:18 PM
To: aix-l@Princeton.EDU
Subject: ether channel - dual nics
Has any figured out a way to have redundant nics?
We have tried ether channel and have not been successful.
Perhaps our set up was in correct (did months ago, having concern today),
but I can call IBM on that one.
Just wondering if others use a correct setup of ether channel or some other
method.
Thanks-
Jennifer
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:22 EDT