From: Green, Simon (SGreen@KRAFTEUROPE.COM)
Date: Tue Nov 19 2002 - 11:42:42 EST
If all you want is the serial number, as you originally said, then lsattr is
the command to use. If you want to get the whole SSA Link Verification
output from a single command, then you should have said so.
Simon Green
Philip Morris ITSC Europe
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
N.B. Unsolicited email from vendors will seldom be appreciated.
> -----Original Message-----
> From: CHANDRASHEKAR, MANI [mailto:MANI__CHANDRASHEKAR@FLEET.COM]
> Sent: 19 November 2002 16:36
> To: aix-l@Princeton.EDU
> Subject: Re: disk serial number
>
>
> I want to know the command that can be used instead of
> diag options..
>
>
> -----Original Message-----
> From: CHANDRASHEKAR, MANI [mailto:MANI__CHANDRASHEKAR@FLEET.COM]
> Sent: Tuesday, November 19, 2002 11:22 AM
> To: aix-l@Princeton.EDU
> Subject: Re: disk serial number
>
>
> The correct serial number is got when you use diag and
> use the ssa
> options and then the ssa link verification. This is the
> serial numbers that
> corresponds to the disk serial numbers pasted in the ssa disks.
>
> -----Original Message-----
> From: Green, Simon [mailto:SGreen@KRAFTEUROPE.COM]
> Sent: Tuesday, November 19, 2002 11:02 AM
> To: aix-l@Princeton.EDU
> Subject: Re: disk serial number
>
>
> What serial number do you want, then? That command gives the
> unique SSA
> serial number and I can't honestly think of anything else
> that's terribly
> useful.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:21 EDT