From: CHANDRASHEKAR, MANI (MANI__CHANDRASHEKAR@FLEET.COM)
Date: Tue Nov 19 2002 - 11:22:07 EST
The correct serial number is got when you use diag and use the ssa
options and then the ssa link verification. This is the serial numbers that
corresponds to the disk serial numbers pasted in the ssa disks.
-----Original Message-----
From: Green, Simon [mailto:SGreen@KRAFTEUROPE.COM]
Sent: Tuesday, November 19, 2002 11:02 AM
To: aix-l@Princeton.EDU
Subject: Re: disk serial number
What serial number do you want, then? That command gives the unique SSA
serial number and I can't honestly think of anything else that's terribly
useful.
Simon Green
Philip Morris ITSC Europe
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
N.B. Unsolicited email from vendors will seldom be appreciated.
> -----Original Message-----
> From: CHANDRASHEKAR, MANI [mailto:MANI__CHANDRASHEKAR@FLEET.COM]
> Sent: 19 November 2002 15:55
>
>
> No this command doesn't give the required serial number...
>
> -----Original Message-----
> From: Green, Simon [mailto:SGreen@KRAFTEUROPE.COM]
> Sent: Tuesday, November 19, 2002 10:40 AM
>
> To show the 8-digit SSA Serial number - that's the one
> printed on the front
> of the disk - I use "lsattr -El hdiskX -a connwhere_shad|cut -c20-27".
> It'll work with pdisk as well.
>
> > -----Original Message-----
> > From: CHANDRASHEKAR, MANI [mailto:MANI__CHANDRASHEKAR@FLEET.COM]
> > Sent: 19 November 2002 15:34
> > To: aix-l@Princeton.EDU
> > Subject: disk serial number
> >
> >
> > Hi!
> >
> > I have a bad disk on the ssa sub system and
> > have to replace
> > it. I wanted to know how to find the right disk to replace. The list
> > configuration command does not show the correct serial
> > number. Is there any
> > other way. I know the diag would show it. But I need to know
> > if there is any
> > other commands that can be used.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:21 EDT