From: Jolet, John (John.Jolet@MISYSHEALTHCARE.COM)
Date: Tue Nov 19 2002 - 10:56:12 EST
go into the diag utility, go to service aids, then the ssa service
aids....there'll be one for "identify"...this will blink the little light on
it.
-----Original Message-----
From: CHANDRASHEKAR, MANI [mailto:MANI__CHANDRASHEKAR@FLEET.COM]
Sent: Tuesday, November 19, 2002 9:48 AM
To: aix-l@Princeton.EDU
Subject: Re: disk serial number
yes...
-----Original Message-----
From: Jolet, John [mailto:John.Jolet@MISYSHEALTHCARE.COM]
Sent: Tuesday, November 19, 2002 10:43 AM
To: aix-l@Princeton.EDU
Subject: Re: disk serial number
is it an ssa disk?
-----Original Message-----
From: CHANDRASHEKAR, MANI [mailto:MANI__CHANDRASHEKAR@FLEET.COM]
Sent: Tuesday, November 19, 2002 9:34 AM
To: aix-l@Princeton.EDU
Subject: disk serial number
Hi!
I have a bad disk on the ssa sub system and have to replace
it. I wanted to know how to find the right disk to replace. The list
configuration command does not show the correct serial number. Is there any
other way. I know the diag would show it. But I need to know if there is any
other commands that can be used.
Thanks,
shekar
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:21 EDT