From: Damir Delija (damir.delija@PBZ.HR)
Date: Thu Nov 07 2002 - 01:38:20 EST
There is clone procedure described in "Managing AIX Server Farms"
and in course "AIX advanced administration"
Essential is, if you are going to clone on diffrent HW platform
to have mksysb tape and original AIX CD, because of missing drivers etc ..
I hope this helps.
Damir Delija
> -----Original Message-----
> From: Dave.Zarnoch@SUNGARD.COM [mailto:Dave.Zarnoch@SUNGARD.COM]
> Sent: Wednesday, November 06, 2002 4:33 PM
> To: aix-l@Princeton.EDU
> Subject: mksysb clone boot hanging
>
>
> Folks,
>
> I have been searching the FAQs and archives but was unable to find any
> pertinent info
>
> I am attempting to clone a P690 LPAR mksysb onto a RS6000
> 7013(595) JSERIES
> server
>
> Everything went OK but it is hanging at this point:
>
> Saving Base Customize Data to boot disk
> Starting the sync daemon
> Starting the error daemon
> System initialization completed.
> 0513-059 The syslogd Subsystem has been started. Subsystem
> PID is 1970.
> 0513-059 The sendmail Subsystem has been started. Subsystem
> PID is 4156.
> 0513-059 The inetd Subsystem has been started. Subsystem PID is 6972.
> 0513-059 The hostmibd Subsystem has been started. Subsystem
> PID is 5452.
> 6 Nov 07:03:47 ntpdate[4508]: can't find host ntp-server
> 6 Nov 07:03:47 ntpdate[4508]: no servers can be used, exiting
> Finished starting tcpip daemons.
> 0513-059 The ctrmc Subsystem has been started. Subsystem PID is 3382.
>
> No login
>
> I have disconnected the ethernet cables
>
> Any help?
>
> Thanks!
>
> Dave Zarnoch
> UNIX Systems Engineer
> SunGard eSourcing
> 600 Laurel Oak Rd.
> Voorhees, NJ 08043
> Dave.Zarnoch@sungard.com
> (800)441-1181
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:19 EDT