From: Holger.VanKoll@SWISSCOM.COM
Date: Mon Oct 28 2002 - 14:04:11 EST
maybe try
diag -a
in addition to the rmdev - commands and reboot
did you check the corresponding filesets? devices.pci.yourcardnumber*
-----Original Message-----
From: Clifton, Pablo [mailto:Pablo.Clifton@BCBSFL.COM]
Sent: Monday, October 28, 2002 7:41 PM
To: aix-l@Princeton.EDU
Subject: AIX 5L on 43P upgrade from 433ML10 DEVICE ISSUES?
Hi-
I've tried a couple times now to:
upgrade a 43P from AIX 433ML10 to 5L
using a "migration install"
The install completes without errors, but after login, both ent0 and
ent1 are in a "defined" state. I can run:
cfgmgr -vl ent0 (ent1)
or mkdev -l ent0
and the adaptesr become available and work fine for network traffic.
However, after rebooting, the adapters are again "defined". The cdrom is
completely missing now from "lsdev -C | grep cd"
I've tried removing en0, en1, ent0, ent1 using "rmdev -dl" and then
re-creating the network interfaces. However, everytime I reboot the box
the adapters are back to defined instead of available.
Has anyone experienced a similar issue?
thanks,
-pablo
-- Pablo Clifton UNIX Tech Services Blue Cross Blue Shield of Florida, Inc., and its subsidiary and affiliate companies are not responsible for errors or omissions in this e-mail message. Any personal comments made in this e-mail do not reflect the views of Blue Cross Blue Shield of Florida, Inc.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:17 EDT