From: pSeries AIX Geek (aixgeek@YAHOO.COM)
Date: Tue Oct 15 2002 - 18:58:31 EDT
Usually, when you create something using RAID 0+1,
you're creating a single physical disk.
You cannot specify the single individual disk within
the RAID 0+1 array where to create the file system;
that kind of defeats the whole purpose.
- pAG
--- "Praveen Kumar K (TSE-IFT-ITPL)"
<praveenkumark@VYSBANK.COM> wrote:
> hi ,
> In a scenario where RAID 10(1+0) is
> confgiured,and a vg has been
> created over which an LV is also created.When i want
> to create a filesystem
> on the above said LV, will i be able to choose the
> Physical disk where i
> want to create this Filesystem. As far as My
> knowledge i felt it that this
> is not possible..if someone can clear my doubts it
> would be very grateful...
>
> TIA
> Regards
> Praveen.K
> >
>
-----------------------------------DISCLAIMER-------------------------------
>
> -----
>
> This Message and any attachments (the "message") is
> intended solely for the
>
> addressees and is confidential. If you receive this
> message in error,
> please
> delete it and immediately notify the sender. Any use
> not in accord with its
>
> purpose, any dissemination or disclosure, either
> whole or partial,
> is prohibited except formal approval. The internet
> cannot guarantee the
> integrity
> of this message. Vysya Bank (and its subsidiaries)
> shall (will) not
> therefore
> be liable for the message if modified.
>
>
__________________________________________________
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos & More
http://faith.yahoo.com
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:16 EDT