From: fmu@OERAG.DE
Date: Mon Sep 30 2002 - 08:19:35 EDT
Hi!
No! I don't change anything on the NT-box. Additional the XTerm runs from
my NT-box to the other AIX-nodes without any problem.
Frank
############################################################################################
>Have you done anything on your NT box recently, like upgrade Exceed, or
>install another X windows client?
>We have had these problems when evaluating Exceed alongside other products
>such as KEAX!. Somewhere their respective config files were getting mixed
>up... the log in worked fine on other NT client boxes with just Exceed
>installed.
>John
-----Original Message-----
From: fmu@OERAG.DE [mailto:fmu@OERAG.DE]
Sent: 30 September 2002 12:55
To: aix-l@Princeton.EDU
Subject: XTerm (eXceed) failed
Hi,
we have some problems with XTerm (eXceed). The start from a XTerm on
my Windows NT box failed.
It works on all SP-nodes but on one node I get:
rexecd: 0826-604 The login is not correct.
I don't change any configurations (/etc/hosts, /etc/hosts.equiv, etc.) on
the AIX-node. Last week it runs fine without any additional entries. But I
try to edit the /etc/hosts and make an entry for the windows-box (I find
some hints and tips in the mailing list). No success.
I test a ping and a telnet from Windows box to the AIX-node and from
AIX-node to to the Windows-box. This works in both directions fine.
What can I check?
Best regards,
Frank Mueller
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:14 EDT