From: Steven Langdale (Langdale_Steven@PERKINS.COM)
Date: Wed Sep 18 2002 - 06:57:26 EDT
Hello John
I don't know if you are "supposed" to do it that way, but I've done exactly
what your asking, it and it does work. So give it a try.
Thanks
Steven
John Dunn
<john.dunn@SE To: aix-l@Princeton.EDU
FAS.CO.UK> cc:
Sent by: IBM
AIX
Discussion
List Subject: Changeing IP addresses in /etc/qconfig
<aix-l@Prince
ton.EDU>
09/18/2002
09:27
Please
respond to
IBM AIX
Discussion
List
Perkins: Confidential Green Retain Until: 10/18/2002
Retention Category: G90 -
Information and Reports
We are changeing the IP addresses of our remote print servers.
As our print queue set up explicitly references IP addresses rather than
hostnames, can I simply change the IP addresses in /etc/qconfig? Ot do I
need to delete and recreate the print queues. I am a bit concerned that the
device value does not seem to contain the whole IP address
e.g
printer1:
device = @147
up = TRUE
host = 147.122.123.23
s_statfilter = /usr/lib/lpd/bsdshort
l_statfilter = /user/lib/lpd/bsdlong
rq = pr234
@147:
backend = /user/lib/lpd/rembak
There are similar entries for the other printers
John
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:12 EDT