Re: AIX backup and restore help requested.

From: Kumar, Praveen (cahoot) (Praveen.Kumar@CAHOOT.COM)
Date: Fri May 07 2004 - 03:23:19 EDT


Try using the chdev command to change the block size of the tape drive in
question.

chdev -l rmt0 -a block_size=128

Regards
Praveen.K

-----Original Message-----
From: Robert Clark [mailto:res03db2@GTE.NET]
Sent: 07 May 2004 03:10
To: aix-l@Princeton.EDU
Subject: AIX backup and restore help requested.

I've been asked to send some data to a customer site, and I need some help.

I'm using a 3592J1A tape drive in a 3494 library attached via SAN using
the atape driver, on AIX 4.33 ML10.

I have a feel for that portion of the work, as we use this setup for day
to day operations with TSM.

The problem I'm running into, is that the 3592 would perform better with
128k or larger block sizes, but I'm having trouble getting "backup" and
"restore" to generate or use 128k blocks.

I've read and re-read the manpages for backup and restore, and it seems
like the "-b" switch determines how many 512 byte blocks make up a
cluster, but this doesn't sound like what I need. (?)

I've also tried having "backup" use standard out, and passing that to dd
to do block size conversion. So far the results are mixed.

Can anyone on the list spare some wisdom wrt "backup" and "restore".

Thanks, [RC]

.sophos.3.80.05.06.

*********************
Internet communications are not necessarily secure and may be intercepted or
changed after they are sent. cahoot does not accept liability for any such
changes.
If you wish to confirm the origin or content of this communication, please
contact the sender using an alternative means of communication.

This communication does not create or modify any contract.

This email may contain confidential information intended solely for use by
the addressee. If you are not the intended recipient of this communication
you should destroy it without copying, disclosing or otherwise using its
contents.

Please notify the sender immediately of the error.

cahoot is a division of Abbey National plc.
Abbey National plc is registered in England, registered number 2294747.
Registered Office: Abbey National House, 2 Triton Square, Regent's Place,
London, NW1 3AN.



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:54 EDT