From: Ayman Rayyan (ayman.rayyan@STS.COM.JO)
Date: Tue May 04 2004 - 03:01:48 EDT
Hi:
There is no dhcp.
Pls. If I want to make the my 10/100/1000 MB card work with 1000MB ,
which mode I had to choose ?
Best Regards
_________________________________________________
Ayman Rayyan
IBM pSeries & AIX System Engineer
STS Group , Amman-Jordan
Tel : +962 6 5802626
Cell : +962 79 6925356
Fax : +962 6 5829213
Ayman.Rayyan@sts.com.jo
www.sts.com.jo
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU] On Behalf Of
John Jolet
Sent: Monday, May 03, 2004 5:30 PM
To: aix-l@Princeton.EDU
Subject: Re: FW: Network problem
is this box, by chance getting it's ip address via dhcp? You'll
probably get other answers, here, but I certainly never trust
auto-negotiation with aix. set it to what you want and then set the
switch port to what you want. eliminate negotiation as a source of
trouble.
Ayman Rayyan wrote:
>Hi Admins:
>
>I have the following problem with (server module: 630):
>
>When rebooting or shutdown & restart happened, the Common Desktop
>Environment could not be start, & the systems going to the fail
>session, the problem is that the network interface which is 10/10/1000
>MB (5706 2-PORT BASE-TX ETHT PCI-X ADPT ) look like need to be
>reconfigured ( delete the adapter & add it again, then configure it).
>
>The server is connected to Extreme Switch with 1000 MB port
>auto-sensing
>
>Notice: 0581 code is appear at booting ---> network problem.
>
>
>Pls. Advise ASAP ?
>
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:53 EDT