From: Kumar, Praveen (cahoot) (Praveen.Kumar@CAHOOT.COM)
Date: Fri Apr 16 2004 - 10:45:35 EDT
Bill,
We take backups on to Disk images but we have never touched these
parameters, as the default values have worked for us. If you have any
problem you can think of tuning the same.
Regards
Praveen.K
-----Original Message-----
From: Bill Verzal [mailto:BVerzal@KOMATSUNA.COM]
Sent: 16 April 2004 15:39
To: aix-l@Princeton.EDU
Subject: DB2 backup to disk under AIX
Anyone out there perform DB2 backups to disk images ? If so, what are your
settings for:
BUFFERS
PARALLELISM
BUFFER
Also - that hardware model is it on ?
Thanks, Bill.
--------------------------------------------------------
"If everything is coming your way, then you are in the wrong lane"
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax
.sophos.3.80.04.16.
*********************
Internet communications are not necessarily secure and may be intercepted or
changed after they are sent. cahoot does not accept liability for any such
changes.
If you wish to confirm the origin or content of this communication, please
contact the sender using an alternative means of communication.
This communication does not create or modify any contract.
This email may contain confidential information intended solely for use by
the addressee. If you are not the intended recipient of this communication
you should destroy it without copying, disclosing or otherwise using its
contents.
Please notify the sender immediately of the error.
cahoot is a division of Abbey National plc.
Abbey National plc is registered in England, registered number 2294747.
Registered Office: Abbey National House, 2 Triton Square, Regent's Place,
London, NW1 3AN.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:50 EDT