Re: [Q] How to setup NTP client under 4.3.3?

From: Bill Verzal (BVerzal@KOMATSUNA.COM)
Date: Thu Apr 08 2004 - 14:27:14 EDT

I've found that all you have to do is be sure port 123 is open at the
firewall, if you are going through one.

Next, add a "server [ip-address]" to the /etc/ntp.conf.

Then stop/start xntpd

This works in 90% of my installations.

BV
--------------------------------------------------------

"If everything is coming your way, then you are in the wrong lane"

Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax

             bbb bb
             <mccux1@HOTMAIL.C
             OM> To
             Sent by: IBM AIX aix-l@Princeton.EDU
             Discussion List cc
             <aix-l@Princeton.
             EDU> Subject
                                       [Q] How to setup NTP client under
                                       4.3.3?
             04/08/2004 01:04
             PM

             Please respond to
                  IBM AIX
              Discussion List
             <aix-l@Princeton.
                   EDU>

I plan to setup NTP client on my AIX 4.3.3 server. Anyone have document or
can point me to the document?

Thanks.

_________________________________________________________________
Persistent heartburn? Check out Digestive Health & Wellness for information
and advice. http://gerd.msn.com/default.asp

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:49 EDT