From: Green, Simon (SGreen@KRAFTEUROPE.COM)
Date: Tue Jul 30 2002 - 11:57:28 EDT
Note that the sysdumpdev command will NOT create a new dump device! It sets
the default dump device to hd7 but it doesn't check whether hd7 exists, or
create it if it's missing.
The dump device must be created manually. It's just a raw LV. You might
like to give it a type of "dump". (mklv -t dump ...)
Simon Green
Philip Morris ITSC Europe
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
N.B. Unsolicited email from vendors will seldom be appreciated.
> -----Original Message-----
> From: ivo bernardino [mailto:Ivo.Bernardino@UNILEVER.COM]
> Sent: 30 July 2002 16:14
> To: aix-l@Princeton.EDU
> Subject: Re: Mirroring rootvg with the mirrorvg command
>
>
> Hi,
>
> You can to create the new sysdump device with command below:
>
> sysdumpdev -P -p /dev/hd7
>
> Check it if this command run and did change:
>
> sysdumpdev -l
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:05 EDT