From: Jolet, John (John.Jolet@MISYSHEALTHCARE.COM)
Date: Tue Jul 23 2002 - 12:35:17 EDT
reject.
-----Original Message-----
From: Ken_Sedlacek@KYRUS.COM [mailto:Ken_Sedlacek@KYRUS.COM]
Sent: Tuesday, July 23, 2002 10:26 AM
To: aix-l@Princeton.EDU
Subject: Re: How to backout ML10? << revised question
Please excuse my poorly worded original question.
New question:
After applying the ML10 updates but 'not committing' them, which of the
following menus would I use to:
1) Go back to the previous version of filesets, then,
2) Delete the ML10 filesets?
Here is the Software Maintenance and Utilities SMIT menu (fastpath:
maintain_software):
Software Maintenance and Utilities
Move cursor to desired item and press Enter.
Commit Applied Software Updates (Remove Saved Files)
Reject Applied Software Updates (Use Previous Version)
Remove Installed Software
To answer my own questions, I think I would: 'Reject Applied.....', then
'Remove Installed ..........'
Comments
TIA
Ken Sedlacek
AIX/TSM/UNIX Administrator
ksedlacek@kyrus.com
IBM Certified Specialist: RS/6000 AIX v4.3 Support
IBM Certified Specialist: RS/6000 SP & PSSP 3
Tivoli Certified Consultant - Tivoli Storage Manager v4.1
"Green, Simon"
<SGreen@KRAFTE To: aix-l@Princeton.EDU
UROPE.COM> cc:
Sent by: IBM Subject: Re: How to backout
ML10?
AIX Discussion
List
<aix-l@Princet
on.EDU>
07/23/2002
11:04 AM
Please respond
to IBM AIX
Discussion
List
As others have said, just apply the updates: don't commit them.
Note that this will use a bit more disk space than committing them straight
away.
I would recommend that you commit all other filesets before you do this;
it'll make things simpler later.
Don't forget to commit the ML10 update eventually!
Simon Green
Philip Morris ITSC Europe
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
N.B. Unsolicited email from vendors will seldom be appreciated.
> -----Original Message-----
> From: Ken_Sedlacek@KYRUS.COM [mailto:Ken_Sedlacek@KYRUS.COM]
> Sent: 23 July 2002 15:10
> To: aix-l@Princeton.EDU
> Subject: How to backout ML10?
>
>
> Enviro:
>
> H70, AIX 4.3.3.06
>
> I am going to upgrade our H70 to ML10.
>
> Not having done this before, how does one "backout" ML10 if need be?
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:05 EDT