From: Bill Verzal (Bill_Verzal@BCBSIL.COM)
Date: Fri Jul 12 2002 - 13:11:06 EDT
Perhaps it is going through an different route outbound ?
-----------------------------------------------------------------------------------------------------------
Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
MailStop: 27.201C
"Jolet, John"
<John.Jolet@MISYSHEALT To: aix-l@Princeton.EDU
HCARE.COM> cc:
Sent by: IBM AIX Subject: transfer problem
Discussion List
<aix-l@Princeton.EDU>
07/12/2002 11:47 AM
Please respond to IBM
AIX Discussion List
Okay, here's an odd one. I've got an H50 that is acting funny....for
instance...i transferred a 26gig file TO it in 3 minutes. To transfer that
file FROM it...well, scp was estimating over an hour. What do I look at
first? it can receive fine, but not transmit?
To fully qualify the program....file transmitted from machine a to b took 3
minuts. from b to c stopped it at 15, 20% done. From a to c 4
minutes...from b to d 2 minutes....from c to b, 2 minutes...pulling from b
to c (scp from c, but with source on b) same result as pushing from b to
c...pulling from b to a...37 seconds.
Why can this machine not transmit properly to that ONE box? but can
receive
from that box just fine?
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:03 EDT