From: Jolet, John (John.Jolet@MISYSHEALTHCARE.COM)
Date: Tue Jul 09 2002 - 16:14:59 EDT
diags say it won't spin up....the lv i'm concerned about is mostly on hdisk2
(which is fine)...and hdisk1...how do I get hdisk3 out of that lv so I can
mount it without losing all the data on hdisk2 and 1?
-----Original Message-----
From: Saxon, Lamar [mailto:Lamar.Saxon@AMERICREDIT.COM]
Sent: Tuesday, July 09, 2002 3:04 PM
To: aix-l@Princeton.EDU
Subject: Re: URGENT failed hdisk problem
That disk is probably already "online". It would be part of the VG since it
would have read the PVID off the disk on boot. What does the output of lspv
tell you ? What about the output of lsvg -p rootvg ?
Lamar
-----Original Message-----
From: Jolet, John [mailto:John.Jolet@MISYSHEALTHCARE.COM]
Sent: Tuesday, July 09, 2002 2:27 PM
To: aix-l@Princeton.EDU
Subject: URGENT failed hdisk problem
I've got a scsi hdisk in a system that had two logical volumes on it, and a
paging space...it seems to have gone batty and forced the system to
reboot...the old hdisk (hdisk3) is now listed as missing, and a new hdisk
(hdisk8) appears, in the same location code..so it's the same disk. Is it
possible to get that disk back online without losing the contents? I think
if I add hdisk8 to the volume group, it's going to format it, isn't it?
Help!
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:02 EDT