From: Dave.Zarnoch@SUNGARD.COM
Date: Mon Jul 08 2002 - 08:42:40 EDT
I was told that the system to be restored had to be the exact same
configuration
as the system that was "backed up".
But I believe that Veritas said they may be working on a solution.
You could contact Robert Tavares (VP of Sales)
Robert Tavares
VERITAS Software
(514) 390-2310 Office
(514) 816-1548 Cell
robert.tavares@veritas.com
He was very helpful.
Dave Zarnoch
UNIX Systems Administration
SunGard eSourcing
600 Laurel Oak Rd.
Voorhees, NJ 08043
Dave.Zarnoch@sungard.com
Bill Verzal
<Bill_Verzal@BCBS To: aix-l@Princeton.EDU
IL.COM> cc:
Sent by: IBM AIX Subject: Re: Bare Metal Restore
Discussion List
<aix-l@Princeton.
EDU>
07/05/2002 03:32
PM
Please respond to
IBM AIX
Discussion List
Can you clarify what you mean by "dissimiliar architectures" ?
For example H50 to 6H1 ?
BV
-----------------------------------------------------------------------------------------------------------
Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
MailStop: 27.201C
Dave.Zarnoch@S
UNGARD.COM To: aix-l@Princeton.EDU
Sent by: IBM cc:
AIX Discussion Subject: Re: Bare Metal
Restore
List
<aix-l@Princet
on.EDU>
07/05/2002
02:17 PM
Please respond
to IBM AIX
Discussion
List
Bill,
We were going to use BMR but found that it will not function
on dissimilar architectures.
(According to BMR(Veritas) sales)
This basically stopped us since our DRs are done on different systems.
Dave Zarnoch
UNIX Systems Administration
SunGard eSourcing
600 Laurel Oak Rd.
Voorhees, NJ 08043
Dave.Zarnoch@sungard.com
(856)566-5022
Bill Verzal
<Bill_Verzal@BCBS To:
aix-l@Princeton.EDU
IL.COM> cc:
Sent by: IBM AIX Subject: Bare Metal Restore
Discussion List
<aix-l@Princeton.
EDU>
07/05/2002 02:59
PM
Please respond to
IBM AIX
Discussion List
Anyone out there using Bare Metal Restore (Veritas) ?
We are looking at it (actually, it is probably a bit farther along than
"looking at it"), and I had a question on how it handles restoring from a
physically different system then the original backup. For example - in a
disaster recovery or test.
I'm concerned about ODM issues and other stuff like that.
Anyone crossed this bridge before ?
Thanks, Bill.
-----------------------------------------------------------------------------------------------------------
Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
MailStop: 27.201C
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:02 EDT