From: Raj Atwal (tatwal@yahoo.com)
Date: Thu Jun 20 2002 - 09:32:29 EDT
Thanks John for your response.
>From the xntpd server I get the following.
# ntpq
ntpq> peers
No association ID's returned
ntpq>
The same command on the ntp client I get the
following.
ntpq> peers
remote refid st t when poll reach
delay offset disp
==============================================================================
timemaster 0.0.0.0 16 u 15 64 0
0.00 0.000 16000.0
ntpq>
Thanks
R. Atwal
From
--- "Jolet, John" <John.Jolet@MISYSHEALTHCARE.COM>
wrote:
> and if, on the SERVER, you type ntpq, then "peers"
> what response do you get?
>
> -----Original Message-----
> From: Raj Atwal [mailto:tatwal@YAHOO.COM]
> Sent: Wednesday, June 19, 2002 5:47 PM
> To: aix-l@Princeton.EDU
> Subject:
>
>
> I have the xntpd daemon running on my server, and I
> stop the daemon running on my client prior to
> running
> the command
>
> ntpdate NTPSERVERNAME
>
> where NTPSERVERNAME is the hostname of my xntpd
> server.
>
> thanks
>
> R. Atwal
>
> --- "Jolet, John" <John.Jolet@MISYSHEALTHCARE.COM>
> wrote:
> > what is the command line you are using? ntpdate
> > servername? or just
> > ntpdate? and is xntpd running on BOTH servers?
> it
> > can't be running on the
> > server you're running ntpdate on, but MUST be
> > running on the other.
> >
> > -----Original Message-----
> > From: Raj Atwal [mailto:tatwal@YAHOO.COM]
> > Sent: Wednesday, June 19, 2002 2:22 PM
> > To: aix-l@Princeton.EDU
> > Subject:
> >
> >
> > I am trying to setup xntpd between 2 AIX servers,
> > one
> > as the master and the other as the client. Yet
> when
> > I
> > run ntpdate on my client, I get the following
> error.
> >
> > 19 Jun 15:13:50 ntpdate[32514]: no server suitable
> > for
> > synchronization found
> >
> > My boxes are less than 10 mins out as it stands
> now,
> > so I know it is not a problem whereby the time
> > difference is too large between server and client.
> I
> > dont want to use the setclock command as that is a
> > one
> > off sync and does not use xntp.
> >
> > Another strange thing is that I can get a win2000
> > box
> > using a xntp client to succuessfully bind and sync
> > with my AIX xntpd server. It just seems between
> aix
> > machines I get a problem. I have included my
> > ntp.conf
> > for server/client.
> >
> > SERVER config
> > server 127.127.0.1
> > #Drift file
> > driftfile /etc/ntp.drift
> >
> > CLIENT config
> > server 192.9.200.97
> > driftfile /etc/ntp.drift
> > tracefile /etc/ntp.trace
> >
> > Help appreciated. TIA L&G.
> >
> > Raj Atwal
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Yahoo! - Official partner of 2002 FIFA World Cup
> > http://fifaworldcup.yahoo.com
>
>
> =====
> Raj Atwal
> Senior Systems Consultant
> Braegen Group Inc.
> 67 Yonge Street
> Toronto
> Ontario
> (416) 366 6363
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! - Official partner of 2002 FIFA World Cup
> http://fifaworldcup.yahoo.com
=====
Raj Atwal
Senior Systems Consultant
Braegen Group Inc.
67 Yonge Street
Toronto
Ontario
(416) 366 6363
__________________________________________________
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:00 EDT