P00>>boot dka400
(boot dka400.4.0.1.1 -file vmunix -flags a)
block 0 of dka400.4.0.1.1 is a valid boot block
reading 12 blocks from dka400.4.0.1.1
bootstrap code read in
Building FRU table
base = 200000, image_start = 0, image_bytes = 1800
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code

UNIX boot - Wed Apr 5 01:30:19 EDT 2000

Loading vmunix ...
Loading at 0xffffffff00000000
Mapping Image Address Space: Complete

Sizes:
text = 6567168
data =  1856032
bss  =  1865104
Starting at 0xffffffff00254390

Alpha boot: available memory from 0x641e000 to 0x13ffea000
Compaq Tru64 UNIX V5.0A (Rev. 1094); Wed Apr  5 02:36:36 EDT 2000
physical memory = 5120.00 megabytes.
available memory = 5021.85 megabytes.
using 6550 buffers containing 51.17 megabytes of memory
Firmware revision: 6.0
PALcode: UNIX version 1.23
AlphaServer 4100 5/533 4MB
Master cpu at slot 0.
pci1 (primary bus:1) at mcbus0 slot 5
Loading SIOP: script c0000000, reg 7fd5e00, data c000a000
scsi0 at psiop0 slot 0
Initializing xcr0.  Please wait.....
xcr0 at pci1 slot 2
isp0 at pci1 slot 4
isp0: QLOGIC ISP1040B/V2
isp0: Firmware revision 5.57 (loaded by console)
isp0: Fast RAM timing enabled.
scsi1 at isp0 slot 0
isp1 at pci1 slot 5
isp1: QLOGIC ISP1040B/V2 - Differential Mode
isp1: Firmware revision 5.57 (loaded by console)
isp1: Fast RAM timing enabled.
scsi2 at isp1 slot 0
pci0 (primary bus:0) at mcbus0 slot 4
eisa0 at pci0
ace0 at eisa0
ace1 at eisa0
lp0 at eisa0
gpc0 at eisa0
fdi0 at eisa0
fd0 at fdi0 unit 0
trio0: S3 Trio64V+ (SVGA) Plug-N-Play, 1.0 Mb
trio0 at pci0 slot 2
tu0: DECchip 21143: Revision: 3.0
tu0: auto negotiation capable device
tu0 at pci0 slot 3
tu0: DEC TULIP (10/100) Ethernet Interface, hardware address: 08-00-2B-C3-67-B2
tu0: no console mode: defaulting to 10BaseT (UTP) port: half duplex
Loading SIOP: script c00d2000, reg 3f9ef00, data c00de000
scsi3 at psiop1 slot 0
isp2 at pci0 slot 5
isp2: QLOGIC ISP1040B/V2
isp2: Firmware revision 5.57 (loaded by console)
isp2: Fast RAM timing enabled.
scsi4 at isp2 slot 0
Created FRU table binary error log packet
kernel console: ace0
NetRAIN configured.
i2c: Server Management Hardware Present
ADVFS: using 46792 buffers containing 365.56 megabytes of memory
vm_swap_init: warning UNSPECIFIED swap device not found
vm_swap_init: swap is now being re-set to lazy (over commitment) mode

INIT: SINGLE-USER MODE


Initializing system for Tru64 UNIX installation.  Please wait...

Assigning a cluster device number to root

trap: invalid memory read access from kernel mode

    faulting virtual address:     0x0000004800000071
    pc of faulting instruction:   0xffffffff00410634
    ra contents at time of fault: 0xffffffff0041052c
    sp contents at time of fault: 0xfffffe0564a57008

panic (cpu 0): kernel memory fault
syncing disks... done

DUMP: Will attempt to compress 197902336 bytes of dump
    : into 4921704432 bytes of memory.
DUMP: Dump to 0x200005: ..........: End 0x200005
succeeded
CP - SAVE_TERM routine to be called
CP - SAVE_TERM exited with hlt_req = 1, r0 = 00000000.00000000

halted CPU 0

halt code = 5
HALT instruction executed
PC = ffffffff00256450
P00>>