From: Padiyath Sreekumaran (kumar.padiyath@psi.ch)
Date: Wed Mar 26 2008 - 09:44:53 EST
Hello,
My present Tru64 WS works with a static address.
I tried to configure it as a DHCP client without success.
I kept my resolv.conf, /etc/routes file as it is.
I made the change in /etc/rc.config with sysman command
for IFCONFIG_0 parameter as follows:
IFCONFIG_0="DYNAMIC netmask 255.255.255.0"
and also with
IFCONFIG_0="DYNAMIC netmask 255.255.0.0"
without success.
In /etc/hosts file I have the Domain Name server entry as well as the
following for
DHCP:
DYNAMIC hostname
Is there any other file which I have to make change? Has any one ever
did a DHCP
Client configuration on a Tru64 machine?
Any help is very much appreciated.
Regards,
Kumar
------------------------------------------------------------------
Padiyath Sreekumar | Tel: +41.56.310.3643
Paul Scherrer Institut | email: kumar.padiyath@psi.ch
AIT | Office: WHGA/U132
WHGA/U132 | Fax: +41.56.310.3649
CH-5232 Villigen PSI |
Switzerland |
-----------------------------------------------------------------
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:37 EDT