Summary: Monitoring hsg80 on t64 5.1b-3

From: John Galt (jgalt163@comcast.net)
Date: Tue Jan 16 2007 - 15:28:20 EST

• Next message: Armin Ollig: ""kernel stack not valid halt" via bootp"
• Previous message: Vimal Upreti: "df -k output & adduser"
• In reply to: John Galt: "Monitoring hsg80 on t64 5.1b-3"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Thanks to all who replied.
Looks like SWCC520 is the way to go. I will try to get a copy from HP.
Many of you replied with suggestions using hsxterm which l use to
manage the array. The scripting some of you sent looks interesting
and I may investigate that for other uses, but I think SWCC is the
easiest method for monitoring and sending alerts.

Thanks again.
John

At 03:10 PM 1/11/2007, you wrote:
>Hello Managers,
>I have in the past used steamd ( SWCC500) to monitor disks on
>hsz70/80 subsystems. For the most part, it has worked well.
>Notifications are sent via email for disk failures and other issues.
>We recently acquired a used ES40 and HSG80 subsystem running 5.1b-3.
>I would like to monitor the SAN controller and receive notifications
>of disk failures.
>
>I am hoping that there is some new method of accomplishing this under 5.1b-3.
>
>What is everyone using to monitor these controllers?
>
>Thanks.
>John
>

• Next message: Armin Ollig: ""kernel stack not valid halt" via bootp"
• Previous message: Vimal Upreti: "df -k output & adduser"
• In reply to: John Galt: "Monitoring hsg80 on t64 5.1b-3"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:33 EDT