How to replace a JBOD in a RA200

From: Mark Schubert (Mark.Schubert@COGITA.COM)
Date: Wed Nov 15 2006 - 22:38:17 EST

• Next message: Mark Schubert: "How to replace a JBOD in a RA200"
• Previous message: Maglinger, Paul: "Root cannot log in to console on one cluster member"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi all,
 
I was wondering what the procedure is for replacing a JBOD connected to
a RA200 RAID controller. HP have indicated that they have to delete all
logical drives defined after and including the JBOD and then recreate
the JBOD after replacing the disk. This sounds very significant just to
replace a disk.
 
I have heard from another source that you just power down the
controller, replace the drive and then restart the controller. Being a
JBOD, the controller does not initialise it or anything.
 
Can anyone with experience with this shed some light on the real
procedure?
 
Thanks,
 
Mark

• Next message: Mark Schubert: "How to replace a JBOD in a RA200"
• Previous message: Maglinger, Paul: "Root cannot log in to console on one cluster member"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:32 EDT