From: Milli Gurung (mgurung@iii.com)
Date: Wed Jun 21 2006 - 19:27:09 EDT
This system has been running on osf5.1 for several years but started
having ss_perform_timeout issues fairly recently. We have replaced all
associated hardware and cables (cpu, disk cabinet, cabinet disks, power
cords, scsi cables & controllers) except for the original boot drive but
the problem still persists almost on daily basis. Any help to solving
this issue is greatly appreciated.
here's the binary log event :
********************************************
Formatted Message:
SCSI event
Event Data Items:
Event Name : sys.unix.binlog.hw.scsi
Priority : 700
PID : 317
PPID : 1
Event Id : 4293
Timestamp : 16-Jun-2006 15:37:20
Host IP address : 10.x.x.x
Host Name : hostname
User Name : root
Format : SCSI event
Reference : cat:evmexp.cat:300
Variable Items:
subid_class (INT32) = 199
subid_num (INT32) = 2
subid_unit_num (INT32) = 152
subid_type (INT32) = 34
binlog_event (OPAQUE) = [OPAQUE VALUE: 1224 bytes]
============================ Translation =============================
Sequence number of error: -1452800329
Time of error entry: 16-Jun-2006 15:36:58
Host name: hostname
SCSI CAM ERROR PACKET
SCSI device class: DEC SIM
Bus Number: 2
Target number: 3
Lun Number: 0
Name of routine that logged the event: ss_perform_timeout
Event information: timeout on disconnected request
############### Entry End ###############
Event information: Active CCB at time of error
############### Entry End ###############
thanks,
mg
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:30 EDT