From: Harihar Krishnan (harik@bma.gov.bh)
Date: Wed Mar 29 2006 - 04:29:06 EST
I wish to thank Chris Wincentsen, Richard Loken, Roberto Romani, William
F Fiore and Werner Rost for their prompt replies. The rsh command did
the trick:
rsh {rnode} "mt ...."
was the solution. Thanks again for your assistance.
Harihar K
===============================================================
-----Original Message-----
From: Harihar K [mailto:harik@batelco.com.bh] On Behalf Of
harik@bma.gov.bh
Sent: Tuesday, March 28, 2006 7:18 PM
To: tru64-unix-managers@ornl.gov
Subject: remote mt operations...
Can some pls enlighten me on whether the "mt" command under Tru64 v5.1
and
v5.1B supports remote node operations? I wish to rewind a tape mounted
on a
remote node and forward to a specific save-set. How do I achieve this? I
tried the command in the format:
mt -f nodex:/dev/ntape/tape0_d1 rewind
where nodex is the remote node. However, it refused to recognize the
string
following -f. How do I achieve this as I want to use it with the
rvrestore
command. Appreciate your prompt reply.
Harihar K
Disclaimer:
[This communication is intended solely for the named recipient and others authorized to receive it. It may contain confidential or legally privileged information. If you are not the intended recipient, please notify us immediately, and note that any disclosure, copying, distribution or action you may take in reliance on this communication is strictly prohibited and may be unlawful. Unless indicated otherwise, this communication is not intended nor should it be taken to create any legal relations, contractual or otherwise. Bahrain Monetary Agency(BMA) is neither liable for the proper and complete transmission of the communication, nor for any delay in its receipt. Whilst BMA undertakes all reasonable efforts to screen outgoing e-mails for viruses, it cannot be held liable for any viruses transmitted by this e-mail].
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:29 EDT