From: Fred Leun (fleun@doh.health.nsw.gov.au)
Date: Thu Mar 02 2006 - 17:36:26 EST
Thanks to the many many replies I got. The consensus is to
query the console variable by
# /sbin/consvar -g sys_serial_num
Again many thanks to Dr. Blinn who has provided the most thorough
explanation included below.
>>> "Dr. Thomas P. Blinn" <tom@felines.mv.com> 2006/03/03 4:34:04 >>>
Not every Alpha system has a serial number, and on most of them that do,
it's really just an SRM console variable value (that is, it's not part of
the hardware, it's a software/firmware artifact and can be changed by the
customer human).
That said, I think that on those systems that do have the console variable,
it can probably be queried by a root capable user using the "consvar"
utility which I believe has a reference page.
The hardware manager ("hwmgr") also may be able to display it, although
again it's a software construct, not a hardware register that's going to be
tied to the system hardware.
Tom (going from memory)
> -----Original Message-----
> is there any simple comand such as
> the 'machinfo' on HP-UX
> to find out the machine serial
> number on Tru64 5.x
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:28 EDT