From: Padiyath Sreekumaran (kumar.padiyath@psi.ch)
Date: Wed Dec 07 2005 - 09:48:52 EST
Hello,
I get the following error when I execute the command
# dump -u0 -f /dev/ntape/tape0_d1 /
dump: Dumping from host pswxxx.psi.ch
dump: Date of this level 0 dump: Wed Dec 7 15:41:04 2005 MET
dump: Date of last level 0 dump: the start of the epoch
dump: Dumping root_domain#root (/) to /dev/ntape/tape0_d1
dump:
dump: Cannot open file-system file root_domain#root
dump: Bad file system specification or bad file system. The raw device must
dump: be entered when the file system's pathname has not been entered in the
dump: fstab file. A bad file system is reported when the the magic number
dump: is not found in the super block.
main(): open(): No such file or directory
dump: The ENTIRE dump is aborted
It seems that the disk is having HW problems. Can I save
the contents of the disk before it is completely dies?
How can I save it to a tape or disk? Please specify the
necessary commands. The machine is still in operation.
Regards,
Kumar
------------------------------------------------------------------
Padiyath Sreekumar | Tel: +41.56.310.3643
Paul Scherrer Institut | email: kumar.padiyath@psi.ch
AIT | Office: WHGA/U132
WHGA/U132 | Fax: +41.56.310.3649
CH-5232 Villigen PSI |
Switzerland |
-----------------------------------------------------------------
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:26 EDT