From: rob.leadbeater@lynx.co.uk
Date: Wed Oct 12 2005 - 04:45:59 EDT
Hi admins,
I'm having problems removing a volume from an ADVFS domain.
The rmvol command appears to be hung, sitting at 99.9% CPU.
After leaving the command to run for around 19 hours (a little excessive
for a 26GB volume) I CTRL-C'd the rmvol.
I now see this output from showfdmn which appears to show there's still
some data on dsk2c which I'm trying to remove.
# showfdmn -k lynx1
Id Date Created LogPgs Version Domain Name
3f229547.000dfe6a Sat Jul 26 15:50:47 2003 512 4 lynx1
Vol 1K-Blks Free % Used Cmode Rblks Wblks Vol Name
1L 26658816 8697520 67% on 128 128 /dev/disk/dsk1c
2 26658816 26403888 1% on 128 128 /dev/disk/dsk2c
3 62914560 29026656 54% on 256 256
/dev/disk/dsk212c
---------- ---------- ------
116232192 64128064 45%
I then balanced the domain, and ran the rmvol again - but this hung
again in a similar fashion. I then defragmented the domain and ran the
rmvol again, but once again it hung.
Running rmvol -v shows pages of output like this:
rmvol: Moving file
file name: <unknown> (setTag: 1.32769 (0x1.0x8001), tag: 1.32769
(0x1.0x8001))
no pages moved
rmvol: Moving file
file name: <unknown> (setTag: 1.32769 (0x1.0x8001), tag: 1.32769
(0x1.0x8001))
no pages moved
rmvol: Moving file
file name: <unknown> (setTag: 1.32769 (0x1.0x8001), tag: 1.32769
(0x1.0x8001))
no pages moved
Any ideas how I can get the rmvol to complete....?
OS is 5.1B pk2.
Cheers,
Rob
This message is intended only for the use of the person(s) ("The intended
Recipient(s)") to whom it is addressed. It may contain information which
is privileged and confidential within the meaning of applicable law. If
you are not the intended recipient, please contact the sender as soon as
possible. The views expressed in this communication are not necessarily
those held by LYNX Express, a UPS Company.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:24 EDT