Problem with DS-KZPCC-AC and ES40/Tru64 5.1B-PK3

From: Hummel Thomas (edv_hummel@dw.dambach.de)
Date: Mon Sep 26 2005 - 03:19:41 EDT

• Next message: Bütow, Michael: "DS10 clock drift with Oxygen VX1 graphics card on 4.0F"
• Previous message: Siebert, Aaron: "SUMMARY: 5.1a versus 5.1b"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Managers,

we have an ES40 (2 x 833Mhz) with 4 GB Ram, Tru64 5.1B-PK3, Alpha Firmware 6.6-19. I installed a DS-KZPCC-AC (Firmware CQ17) and connected it to the internal drive cage DS-610-6D. The 3 x HP 72 GB 10k Hotplug SCSI Drives are configured as a RAIS 5. But neither in /devices/disk nor in the disk-app in CDE are entries of the RAID-Volume.

On console the volume and the controller are shown as follows:

dza517.0.0.2004.1 DZA517 (BSA)
pza0.0.0.2004.1 I2OA0

Any ideas why the volume doesn't appear? Normally dsfmgr have to create the /dev entries at boot time, right? TIA.

Best regards,
Thomas Hummel

• Next message: Bütow, Michael: "DS10 clock drift with Oxygen VX1 graphics card on 4.0F"
• Previous message: Siebert, Aaron: "SUMMARY: 5.1a versus 5.1b"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:23 EDT