From: David Gutierrez (davegu1@hotmail.com)
Date: Wed Jun 15 2005 - 12:01:24 EDT
We have the latest software and hardware revisions. ES45 Cluster running
Tru64 5.1Bpk4
Firmware revision: 6.9-2 PALcode: UNIX version 1.92-33
The following emx gbic card is a emx2 at pci1 slot 2 FCA-2354 : Driver Rev
2.14 : F/W Rev 3.81A4(1.01A0)
# hwmgr -show fibre
ADAPTER LINK LINK FABRIC SCSI CARD
HWID: NAME STATE TYPE STATE BUS MODEL
-----------------------------------------------------------------------------
42: emx0 down scsi1 FCA-2354
71: emx2 paused point-to-point scsi4 FCA-2354
81: emx3 up point-to-point attached scsi5 FCA-2384
83: emx4 up point-to-point attached scsi6 FCA-2384
#
We have this card directly connected to a Spectra Logic tape library.
Whenever we go through the switch the connection seems fine and when we go
directly to the jukebox the card goes into the paused status.
What can be done to bring the emx2 card back from the paused status.
What we want to accomplish is to be able to see that card attached to a
library and use it as a backup device.
TIA,
David
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:19 EDT