From: Bhattacharya Dhritiman \(ext\) (dhritiman.bhattacharya.ext@siemens.com)
Date: Mon Apr 18 2005 - 03:56:33 EDT
Hello Tru64 Gurus,
First of all thanks a lot for all the support you all have been providing.
I am facing some problem in configuring a Tape drive to one of our Tru64
Clusters. Here is the details.
1. Cluster S/W : Tru Cluster 5.1 on Tru64 5.1A with Patch kit 6.
2. Server Hardware : DS20E
3. Tape Robot Series : Compaq MSL5026.
4. Firmware version for Tape Robot : 3.19
5. SCSI Controller : 3X-KZPCA-AA
The tape robot is connected to the Host.
Ran "dsfmgr -K". Then when "scu scan edt" is run, it gives the EVM SCSI
Alerts.
##############################################################
Sequence number of error: 1983622408
Time of error entry: 15-Apr-2005 15:00:38
Host name: MYHOST
SCSI CAM ERROR PACKET
SCSI device class: DEC SIM
Bus Number: 6
Target number: 0
Lun Number: 0
Name of routine that logged the event: ss_perform_timeout
Event information: timeout on disconnected request
#############################################################
&
#############################################################
Sequence number of error: 1983622406
Time of error entry: 15-Apr-2005 15:00:06
Host name: MYHOST
SCSI CAM ERROR PACKET
SCSI device class: UNKNOWN
Bus Number: 6
Target number: 7
Lun Number: 7
Name of routine that logged the event: isp_reinit
Event information: Beginning Adapter/Chip reinitialization (0x1)
#############################################################
According to the Robot Manual, the Media changer software should have been
automatically installed for all the Tru64 OS v5.0 and above. It is also
mentioned that the Robot Utility software can be found in Associated
Products CD#2. However I am unable to find it in Associated Products CDs.
Can you please suggest how to get rid of the problem and make the Robot work
?
Regards,
Dhritiman.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:17 EDT