From: Shaun.Racine@intier.com
Date: Mon Feb 28 2005 - 07:41:35 EST
Hi Managers,
Tru64 v5.1A PK6
We have connected a null-modem serial cable between ES40 com 1 and a
MS-Windows server. I was expecting to use Hyperterminal on the ms-windows
server, hit return a few times and see the login prompt. But no response.
I set Hyperterminal to 9600, software flow(XON/XOFF), 8 bit no parity, 1
stop bit
I intend to access these servers remotely to install a CSP (C1476.02
AT_G08565: Fix for premature connection termination) in single user mode,
and before bringing down to SRM I wanted to check connectivity over this
serial cable.
I have got exactly the same problem at another site with a DS10.
Where am I going wrong?
consvar "console" is currently set to graphics, should this be serial
before I see the login prompt? Are there any other consvars which need to
be investigated?
TIA
Shaun
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:16 EDT