From: Ron Bramblett (bramblet@fuller.com)
Date: Mon Jan 31 2005 - 09:33:54 EST
Hello,
Basic Question
I asked this question
SWXCR xcr0 hardware information:
RAID Array 200 Controller Family Information Utility V1.03
Copyright (c)1997,2000 by Compaq Computer Corporation, all rights reserved.
ra200info Error: The specified board has returned error status 0x106 during
the attempt to retrieve CONFIG information.
I got a general answer back from Dr. Blinn
I called T/S to get the answer I needed.
They told me to enable fault management and battery backup and write-back
cache.
Once I did that over the weekend all I had to do was bring the system up to
full user mode.
Verify that the drive had a fault light on
Remove the drive
Install the replacement drive
Sit back and watch the system rebuild.
Now if I had the online Management software for 4.0g and this raid set. It
would be much easier. Doesn't do anything for job security but I am still
needed to do so much more.
Thanks
-- Ron Bramblett Systems Administrator Fuller Brush Company
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:14 EDT