Critical Status SWXCR Raid Contrller

From: Ron Bramblett (bramblet@fuller.com)
Date: Fri Jan 28 2005 - 11:43:27 EST

• Next message: Maglinger, Paul: "Df command showing 100%, but still have room"
• Previous message: Padiyath Sreekumaran: "Port number question."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello,
I have an AS2000 with a SWXCR Raid Contrller that is giving me an error.
I am in the dark ages and am running 4.0g PK3

Any help would be appreciated.

I ran sys_check on it this morning and found this error

 SWXCR xcr0 hardware information:

RAID Array 200 Controller Family Information Utility V1.03
Copyright (c)1997,2000 by Compaq Computer Corporation, all rights reserved.

ra200info Error: The specified board has returned error status 0x106 during
                 the attempt to retrieve CONFIG information.

SWXCR xcr0 controller parameters:

RAID Array 200 Controller Family Information Utility V1.03
Copyright (c)1997,2000 by Compaq Computer Corporation, all rights reserved.

ra200info Error: The specified board has returned error status 0x106 during
                 the attempt to retrieve CONFIG information.

SWXCR xcr0 logical drive parameters:

RAID Array 200 Controller Family Information Utility V1.03
Copyright (c)1997,2000 by Compaq Computer Corporation, all rights reserved.

ra200info Error: The specified board has returned error status 0x106 during
                 the attempt to retrieve CONFIG information.

SWXCR xcr0 physical drive parameters:

RAID Array 200 Controller Family Information Utility V1.03
Copyright (c)1997,2000 by Compaq Computer Corporation, all rights reserved.

ra200info Error: The specified board has returned error status 0x106 during
                 the attempt to retrieve CONFIG information.

SWXCR xcr0 error counters:

RAID Array 200 Controller Family Information Utility V1.03
Copyright (c)1997,2000 by Compaq Computer Corporation, all rights reserved.

ra200info Error: The specified board has returned error status 0x106 during
                 the attempt to retrieve CONFIG information.

SWXCR xcr0 controller status:

RAID Array 200 Controller Family Information Utility V1.03
Copyright (c)1997,2000 by Compaq Computer Corporation, all rights reserved.

ra200info Error: The specified board has returned error status 0x106 during
                 the attempt to retrieve CONFIG information.

-- 
Ron Bramblett
Systems Administrator
Fuller Brush Company

• Next message: Maglinger, Paul: "Df command showing 100%, but still have room"
• Previous message: Padiyath Sreekumaran: "Port number question."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:14 EDT