From: Cohen, Andy (Andy.Cohen@cognex.com)
Date: Wed Jan 19 2005 - 14:46:16 EST
We have two alpha servers both running 5.1A PK4. They each have an
RA3000 connected to them. On one of them I can see the HSZ22 fine :
scu> show edt
CAM Equipment Device Table (EDT) Information:
Bus/Target/Lun Device Type ANSI Vendor ID Product ID Revision
N/W
-------------- ----------- ------ --------- ---------------- --------
---
0 6 0 Sequential SCSI-2 DEC TLZ10 (C) DEC 04a8
N
1 1 2 Direct SCSI-2 DEC HSZ22 (C) DEC D11W
W
2 0 0 Direct SCSI-2 DEC RZ2ED-LS (C) DEC 0306
W
2 1 0 Direct SCSI-2 DEC RZ2ED-LS (C) DEC 0306
W
3 0 0 CD-ROM SCSI-2 COMPAQ CD-224E 9.5B
N
7 0 1 Direct SCSI-2 DEC HSZ22 (C) DEC D11W
W <===
root@odin <mailto:root@odin> ==> hwmgr -vi dev
HWID: Device Name Mfg Model Location
------------------------------------------------------------------------
------
3: /dev/dmapi/dmapi
4: /dev/scp_scsi
5: /dev/kevm
46: /dev/disk/floppy0c 3.5in floppy fdi0-unit-0
60: /dev/disk/dsk0c DEC RZ2ED-LS (C) DEC bus-2-targ-0-lun-0
61: /dev/disk/cdrom0c COMPAQ CD-224E bus-3-targ-0-lun-0
62: /dev/ntape/tape0 DEC TLZ10 (C) DEC bus-0-targ-6-lun-0
63: /dev/disk/dsk1c DEC RZ2ED-LS (C) DEC bus-2-targ-1-lun-0
64: /dev/disk/dsk2c DEC HSZ22 (C) DEC bus-1-targ-1-lun-2
<===
65: /dev/disk/dsk3c DEC HSZ22 (C) DEC bus-7-targ-0-lun-1
<===
-- the other one I can't:
scu> show edt
CAM Equipment Device Table (EDT) Information:
Bus/Target/Lun Device Type ANSI Vendor ID Product ID Revision
N/W
-------------- ----------- ------ --------- ---------------- --------
---
0 0 0 Direct SCSI-2 DEC RZ1CB-CS (C) DEC 0656
W
0 1 0 Direct SCSI-2 DEC RZ1DB-CA (C) DEC LYJ0
W
0 2 0 Direct SCSI-2 DEC RZ1DB-CA (C) DEC LYJ0
W
0 3 0 Direct SCSI-2 DEC RZ1CF-CF (C) DEC 1614
W
0 4 0 CD-ROM SCSI-2 DEC RRD46 (C) DEC 0557
N
0 5 0 Sequential SCSI-2 DEC TLZ10 (C) DEC 04a8
N
root@florida <mailto:root@florida> ==> hwmgr -vi dev
HWID: Device Name Mfg Model Location
------------------------------------------------------------------------
------
3: /dev/dmapi/dmapi
4: /dev/scp_scsi
5: /dev/kevm
34: /dev/disk/floppy0c 3.5in floppy fdi0-unit-0
40: /dev/disk/dsk0c DEC RZ1DB-CA (C) DEC bus-0-targ-1-lun-0
41: /dev/disk/dsk1c DEC RZ1DB-CA (C) DEC bus-0-targ-2-lun-0
42: /dev/disk/cdrom0c DEC RRD46 (C) DEC bus-0-targ-4-lun-0
44: /dev/ntape/tape0 DEC TLZ10 (C) DEC bus-0-targ-5-lun-0
45: /dev/disk/dsk3c DEC RZ1CB-CS (C) DEC bus-0-targ-0-lun-0
46: /dev/disk/dsk4c DEC RZ1CF-CF (C) DEC bus-0-targ-3-lun-0
What do I have to do to get the HSZ22 to show up so I can begin using
the disks that are in the RA3K?
Thanks very much!
Andy
Andy Cohen
Database Systems Administrator
Cognex Corporation
1 Vision Drive
Natick, MA 01760
508-650-3079
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:14 EDT