SUMMARY: Changing IPs on Tru64

From: Wayne Dawson (Wayne_Dawson@inventuresolutions.com)
Date: Tue Dec 21 2004 - 22:48:00 EST


Sorry about the delay in getting the summary out. I had some time off.

My question was what I needed to change to change IP and hostname on a
Tru64 v5.1 machine, and if there was a script to change it. This was
needed because of a switch to a new ISP.

Most pointed out the files to look at, and mentioned that netconfig or
systman (or systman network) can be used. For changing the hostname I
was pointed to the best practices document in either pdf format or html
format.
The urls for this were:
http://h30097.www3.hp.com/docs/best_practices/HOSTNAME/hostname_bp.pdf
and
http://h30097.www3.hp.com/docs/best_practices/HOSTNAME/TITLE.HTM
The alternative procedure was what I followed.

Instead of using sysman to change things I edited the files that I was
advised to look at, namely:

/etc/hosts
/etc/routes (default gateway, any static routes needed)
/etc/rc.config (hostname, ifconfig)
/etc/resolv.conf
/etc/networks
Tom Linden mentioned that If you I ran my own dns, I'd have to look at
/etc/namedb/hosts.db

(Actually, this machine is a dns client and not a server, but that's
still good advice.)
He also mentions that it might be wise to grep through all the files
under /etc for the ip address, and notes that dns entries are stored in
reverse.

Robert Honore cautioned that I make sure that the DNS changes and
globally registered info for Arin and Internic has been done.

Eric Sisson mentioned that rc.config and rc.routes are symlinks to
rc.config -> ../cluster/members/{memb}/etc/rc.config
routes -> ../cluster/members/{memb}/etc/routes, and if I wanted to make
a backup I should go to real directories and do it there.

The only thing I found after changing the hostname was that CDE
complained about invalid file specification starting file manager and
app manager. That was "fixed" by going into the CDE configuration, and
telling it to use CDE as a display manager (even though it was to start
with).

So I'd like to thank the following people for their help.
Joseph Senulis,
Jeff Beck,
Alan Davis,
Charles Ballowe,
Alan Pearson,
Eric Sisson,
Robert Honore,
Howard Arnold
Phil Baldwin
Lucien Hercaud,
Tim Brown,
Joe Carrico,
Tom Linden,
Reoberd Dege,
Alen Yokhanis,
Martin Koerfer,
Shaun Racine,
Henk Kalle, and
Eric Milligan

>I have an AlphaServer DS10 running Tru64 V5.1 (Rev 732), and an
>AlphaServer 800 running 4.0F. Due to a switch to a new ISP, I have to
>reconfigure the IP Addresses.
>
>Since I'm new to Tru64, can someone where (besides the host file), I
>need to change this.
>
>Any gotchas to consider? What will happen with CDE when I change
things?
>
>
>Probably asking too much but is there a configuration script/utility
>that can do everything. I may be changing on machine's hostname too.
>
>Wayne Dawson



This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:13 EDT