From: Jim Kurtenbach (KurtenbachJ@crlcorp.com)
Date: Wed Dec 15 2004 - 16:10:13 EST
Greetings and Happy holidays!
I again find myself dipping into the communal pool of Tru64 knowledge.
I have an ES40 that I am trying to attach to a SAN. This system is using
KGPSA fibre controllers, connecting to a brocade switch, connecting to a
hsg80.
I built 10 units, d0 through d10.
Tru64 only sees the first eight, scsi id's 0-7. I've tried using emxmgr to
remap some id's but he only sees 2 devices, scsi id 0 and 1.
How do I get tru64 version 4.0g to see higher scsi id's?
Thanks in advance.
Jim
P. S. I tried the HSG80's in SCSI-2 and SCSI-3 mode to no avail. They are
running in transparent failover mode.
CONFIDENTIALITY NOTICE: The information in this message, and any attachment,
is intended for the sole use of the individual and entity to whom it is
addressed. This information may be privileged, confidential, and protected
from disclosure. If you are not the intended recipient you are hereby
notified that you have received this communication in error and that any
review, disclosure, dissemination, distribution or copying of it, or its
contents, is strictly prohibited. If you think that you have received this
message in error please notify the sender and destroy all copies of this
communication and any attachments. Thank you.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:13 EDT