From: Zoong PHAM (zoong@zoong.com)
Date: Mon Nov 08 2004 - 18:32:53 EST
I missed some information from my previous post:
* Things are working or appear working:
- power supply unit fan, 2 front fans: rotating.
- RAM (all modules): tested on another AlphaServer.
When one or all modules are removed, there are couple of beeping sound.
- CD-ROM drive: can be ejected.
- hard disks light: blinking and stay on green.
- little lights for power button, reset button and halt button are green.
- top cover is on.
- There is no CPU fan. CPU heat-sink is warm.
* Things are not working:
- nothing on the front LED, even when power up.
- nothing on serial console: no prompt
- nothing on VGA monitor connected to the built-in VGA output port.
- nothing happens after typed *blindly* b and boot from serial console.
- can not connect from network.
* Things I have tried:
- re-sit CPU board.
- re-sit all RAM modules.
- make sure all removable chips are in firmly.
Note:
- The box was running Tru64 5.1-B fine before.
- The box is a home machine so it's not covered by HP support.
- I don't have any other AlphaServer 1000 to test the CPU board or
the motherboard.
Thanks a lot for many replies so far.
Zoong
> ----- Original Message -----
> From: "Zoong PHAM" <zoong@zoong.com>
> To: <tru64-unix-managers@ornl.gov>
> Sent: Sunday, November 07, 2004 7:53 PM
> Subject: AlphaServer 1000 4/233 just stops working
>
>
> > My AlphaServer 1000 4/233 just stops working:
> > - doesn't boot, no display in the LED, no output to neither VGA or
> > serial console.
> > - There is power since all the fans are working, the disk LEDs are
> > lit up, the CD tray can be ejected.
> > - the RAMs are working. I moved them to other AlphaStation and they
> > work there. If I remove a (or all) RAM modules, there are bips so
> > it seems the memory controller on the motherboard is working.
> > - I tried to re-sit the CPU daughterboard and all removable chips.
> > - I was thinking of replacing battery but there is no battery on
> > the mother and daughter boards.
> > - It worked OK before with Tru64 5.1B.
> >
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:11 EDT