From: Timo Aaltonen (tjaalton@cc.hut.fi)
Date: Thu Nov 04 2004 - 09:30:01 EST
Hi
I'm having problems rolling-upgrading a Trucluster 5.1B PK3 -> PK4.
Network traffic (rsh et al.) through the interconnect works, but still I
only get errors like:
-- # clu_upgrade -v check setup 1 Retrieving cluster upgrade status. *** Error *** All members must be running without tagged files. -- # clu_upgrade setup 1 This is the cluster upgrade program. You have indicated that you want to perform the 'setup' stage of the upgrade. Do you want to continue to upgrade the cluster? [yes]: *** Error *** Member '1' appears to be booting or is in single-user mode. Either wait for the node to continue booting, boot the node to multiuser mode, or halt the node using the shutdown command. After all members are running in multiuser mode or halted, you can rerun the clu_upgrade command. *** Error *** Member '2' appears to be booting or is in single-user mode. Either wait for the node to continue booting, boot the node to multiuser mode, or halt the node using the shutdown command. After all members are running in multiuser mode or halted, you can rerun the clu_upgrade command. -- I have no idea what's going on.. I haven't used rolling upgrade before. The "rolls_ver_lookup" in sysconfigtab is 0 on both nodes, and the runlevel is 3. t:T
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:10 EDT