From: Rudolf Gabler (rug@usm.uni-muenchen.de)
Date: Wed Sep 15 2004 - 06:41:40 EDT
Hi managers,
I'm in the migrating state of a 3 member cluster from a HSG80 system to a
eva5000.
I use the procedure described in the cluster administration manual chapter
11 (Troubleshooting clusters) to
Move the cluster member boot disks from the HSG80 to EVA5000 disks.
The first member (a DS20) went well but the second member (a 4100) yields
only in:
AlphaServer 4100 Console V6.0-4, 10-MAY-2001 10:11:42
CPU 0 booting
(boot dga200.1001.0.2.1 -file vmunix -flags A)
block 0 of dga200.1001.0.2.1 is not a valid boot block
bootstrap failure
The dga200.1001.0.2.1 was created with
set mode diag
wwidmgr -clear all
init
set mode diag
wwidmgr -show wwid
wwidmgr -quickset -item 6 -unit 200
(item 6 comes from the wwidmgr -show wwid command which shows the uniq path
to the new disk)
Any hints what could go wrong
Regards, Rudi G.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:08 EDT