From: Rich Glazier (rglazier2002@yahoo.com)
Date: Sat Aug 28 2004 - 14:37:05 EDT
--- Rich Glazier <rglazier2002@yahoo.com> wrote:
> DS20E, T64 5.1A PK6, FW 6.7, No HW kit.
>
> I have a 3X-DE602-BB Dual RJ45 10/100 Ethernet card
> in
> a DS20E. It is recognized by the system and works
> fine. I am using both ee0 and ee1.
>
> This card also came with the fiber Ethernet add on
> daughter card. I installed this card per the
> instructions that came with it, which was just to
> plug
> it in the slots.
>
> When I brought the system up, it was not recognized.
>
> It did not show up on the boot sequence, or in
> ifconfig.
>
> I booted to genvmunix and built a new kernel,
> rebooted to the new kernel, but it was still not
> recognized. Show config at the SRM level sees a
> device at PCI Slot 2 device 3, but there is no
> description on MAC address associated with it.
>
> All the information I've found in this card says it
> has Tru64 driver support. I am at the latest
> firmware
> (6.7). I have no additional HW kits loaded.
>
> Has anyone gotten this card to work?
>
> Thanks
>
> P.S. This network card was listed as a 10/100/1000
> network card in the literature that came with it,
> but
> subsequent online searches show it as only a 10/100
> card. I believe this is only a 10/100, unless
> someone
> knows differently.
>
>
>
> _______________________________
> Do you Yahoo!?
> Win 1 of 4,000 free domain names from Yahoo! Enter
> now.
> http://promotions.yahoo.com/goldrush
>
_______________________________
Do you Yahoo!?
Win 1 of 4,000 free domain names from Yahoo! Enter now.
http://promotions.yahoo.com/goldrush
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:07 EDT