From: Jim Zimmerman (jgz@thezimmermans.org)
Date: Thu Aug 19 2004 - 12:17:25 EDT
We have an ES40 running Tru64 v 5.1a. We were running patch kit 3 with no other patches. We had to install patch kit 6 and the new hardware delivery-7 to support some new hardware we recently purchased. We used the patch kit version on the new hardware delivery-7 CD. Some large print jobs are restarting in the middle of printing. This is not happening all of the time, just once in a while. Since the updates, we are getting the following kinds of messages in the lpr.log:
Aug 19 08:41:41 mega1 lpd[89390]: ERROR -- read_all_chars: read() failed, error: Connection reset by peer
Aug 19 08:41:41 mega1 lpd[89390]: WARNING -- sendfile: no response -- return REPRINT
Below is a sample of the debug log:
Aug 19 08:41:40 mega1 lpd[796]: DEBUG -- fork_with_retries: child pid: 89390
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- entering doit()
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- lpd/doit: got PRINTJOB request for printer 49_rprt1
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- printjob: entered printjob, printer 49_rprt1
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- Entering init()
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- printjob: sent ACK, printer 49_rprt1
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- STB CHECK, sd_stb.st_mode: 40755, after stat of SD
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- STB CHECK, lo_stb.st_mode: 100644, after stat of LO
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- lock file created, lfd: 4
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- about to check reset queue flag, lo_stb.st_mode: 100644
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- STB CHECK, q_stb.st_mode: 100660, after stat of q->q_name
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- openpr: entered openpr(), printer 49_rprt1
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- openpr: LP is null in /etc/printcap, RM is ca-eureka-rprt1, printer 49_rprt1
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- entering getport(ca-eureka-rprt1, 0)
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- getport: entered getport(), rhost ca-eureka-rprt1
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- writeStatus: status file update, printer 49_rprt1: Thu Aug 19 08:41:40 2004: sending to ca-eureka-rprt1
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- Entering sendit(cfA313mega1.malys.com)
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- Entering sendfile(3, dfA313mega1.malys.com)
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- writeStatus: status file update, printer 49_rprt1: Thu Aug 19 08:41:40 2004: sending files to ca-eureka-rprt1 to be printed
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- writeStatus: status file update, printer 49_rprt1: Thu Aug 19 08:41:40 2004: done sending files to ca-eureka-rprt1 to be printed
Aug 19 08:41:40 mega1 lpd[89390]: DEBUG -- Entering sendfile(2, cfA313mega1.malys.com)
Aug 19 08:41:41 mega1 lpd[89390]: ERROR -- read_all_chars: read() failed, error: Connection reset by peer
Aug 19 08:41:41 mega1 lpd[89390]: WARNING -- sendfile: no response -- return REPRINT
Aug 19 08:41:41 mega1 lpd[89390]: DEBUG -- STB CHECK, lo_stb.st_mode: 100644, after stat of lfd
Aug 19 08:41:41 mega1 lpd[89390]: DEBUG -- writeStatus: status file update, printer 49_rprt1: Thu Aug 19 08:41:41 2004:
Aug 19 08:41:41 mega1 lpd[89390]: DEBUG -- close_pfd: closing LP, pfd 5, pfd_trace_no: 3, pfd_trace_cnt: 1
Aug 19 08:41:41 mega1 lpd[89390]: DEBUG -- printjob: exiting since all done, printer 49_rprt1
Aug 19 08:41:41 mega1 lpd[89390]: DEBUG -- Exiting printjob() OK from printjob_exit, exit trace: 17
Thank you,
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:06 EDT